Shopping Cart

LAB 01

Adjusting the time

Pull the crown right out to position 2. Adjust the hands by turning the crown in either
direction.
Push the crown back in to position 1.

Securing the strap

- Push pin tab inward while aligning strap
- Align strap pin holes on either side of the watch
- Release pin tab to lock strap in place

SNOW STAR

Adjusting the time

Pull the crown right out to position 3. Adjust the hands by turning the crown in either
direction. Push the crown back in to
position 1.

Quick date adjustment (standard)

Pull the crown out to the intermediate position 2. Adjust the date by turning the crown
forwards (clockwise), then push the crown back in again to position 1. It is necessary to
adjust the date after each month with less than 31 days.

Securing the strap

- Push pin tab inward while aligning strap
- Align strap pin holes on either side of the watch
- Release pin tab to lock strap in place

ARCHIMÈDES by Milus

Your Archimèdes by Milus has 2 crowns, A and DIVER , which can be used for specific functions.

Crown A: 3 positions

Adjusting the time and stop seconds

Unscrew crown A and pull it out to position 3. The seconds hand will now stop. Adjust
the time by turning the crown in either direction. Synchronise your watch with a time
signal (telephone, radio, TV) and then push the crown A back in to position 1, and screw
in firmly.

Quick date adjustment (standard)

Pull the crown out to the intermediate position 2. Adjust the date by turning the crown
forwards (clockwise), then push the crown back in again to position 1. It is necessary to
adjust the date after each month with less than 31 days.

DIVER screw-in crown

Verifying your diving time

Unscrew the DIVER crown. When you start diving turn the rotating bidirectional ring
to adjust the needle to the minute hand. Push the crown back in again and then screw in
firmly.
You can read off your diving time from the minute hand on the graduations of the rotating
bidirectional ring.
The example shows: 15 minutes diving time.

Securing the strap

- Push pin tab inward while aligning strap
- Align strap pin holes on either side of the watch
- Release pin tab to lock strap in place